Topic: DRL Bypass w/ Relay Harness

[jRox]

Disclaimer: ***Any type of modification of your car's electrical system is dangerous and may result in personal injury and/or damage to your vehicle. When purchasing this product, you assume full responsibility and potential risks in running this DRL Bypass w/ Relay Harness.***

*Vehicle Compatibility:
2008-2010 Lancer including all models: DE, ES, GTS, RA, Evo X (ONLY non-SSS halogen headlights)
2007-2010 Outlander
2006-2007 Galant

*This DRL Bypass w/ Relay Harness is also 100% compatible with Stock OEM Lights. This means Aftermarket HID's are NOT required to utilize this DRL Bypass.


The DRL Bypass will simply eliminate the DRL's. Therefore, no flickering is present when running HID's. The DRL Bypass w/ Relay Harness is completely 100% Plug & Play and requires no splicing of the OEM wiring or messing with the fuse box; Thus saving you from any warranty issues and/or headaches. With the DRL Bypass properly installed, all lights will assume standard normal function:

Position 0 - All lights OFF, DRL's OFF
Position 1 - Parking Lights ON, DRL's OFF
Position 2 - Parking Lights ON, Low Beams ON

Here's a video demonstrating the function of the DRL Bypasses that I provide:

2008 2009 Lancer DRL Bypass	Small | Large

DRL Bypass w/ Relay Harness:




The DRL Bypass shown may vary slightly (i.e. 1 ground or 2 grounds). However, they will provide the same function.

I can assure you that you will be buying a DRL Bypass with a quality build as I am currently pursuing a career as an Electrical Engineer in NJIT.

For your convenience as the customer, I test each DRL Bypass individually before I ship them out to confirm its 100% working order.


*Price & Shipping:
All transactions are done via Ebay - http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=180515802509

Local meetup price:  $40
Shipping within the US: $45 shipped via USPS Priority Mail w/ Tracking & Confirmation
I will ship out your order the SAME day or the following day after. At your convenience, I will also include a Tracking Number whether shipped within US or to Canada (Rates may vary).

*Return/Exchange:
Void after 30 days from date of delivery.
Void if the DRL bypass is tampered in anyway. I will know, I made it.
Valid only for defected/faulty products.
If it’s been over 30 days, I can offer a repair service; Contact me for further info.


Installation Instructions: http://projectlancer.info/Howtos/DLRInstructions.pdf

I personally have been running this setup DRL Bypass w/ Relay Harness since March 12, 2009, with no issues/problems. I've also sold over 300 sets across other Mitsubishi/Lancer forum boards.


Feel free to contact me if you have any questions. Thank you for your interest! 

[kleanthis]

Excellent article! But, if I have a complete HID's set, won't it contain this equipment? And even if it does't, won't a car's electrician know what to do, so the HID's work properly? And somethind else.. Why do I need a DRL bypass and a relay harness?

[jRox]

Our 08/09 Lancers have Daytime Running Lights. "The DRL signal is NOT a constant DC (6V, 9V, etc.) but rather a square waveform peaking at 14VDC and a frequency of about 60Hz (this is better for the bulb longevity than running them at 6V)"

If you run a set of HID's in the Lancers, the DRL's will cause your HID lights to flicker. Now to avoid the flicker, you can have your lights ON all the time. OR, you can simply BYPASS the DRL's. There are several ways to "BYPASS" the DRL's--which may include splicing the wiring harness. Some people would rather not splice or interfere with the OEM wiring, so THIS DRL Bypass w/ Relay Harness acts as another option. It is completely plug & play; NO splicing.

This DRL Bypass w/ Relay Harness serves as two things: 1) DRL bypass (eliminate)  ..  2) Standard Relay Harness for HID's

[kleanthis]

Our 08/09 Lancers have Daytime Running Lights. "The DRL signal is NOT a constant DC (6V, 9V, etc.) but rather a square waveform peaking at 14VDC and a frequency of about 60Hz (this is better for the bulb longevity than running them at 6V)"

If you run a set of HID's in the Lancers, the DRL's will cause your HID lights to flicker. Now to avoid the flicker, you can have your lights ON all the time. OR, you can simply BYPASS the DRL's. There are several ways to "BYPASS" the DRL's--which may include splicing the wiring harness. Some people would rather not splice or interfere with the OEM wiring, so THIS DRL Bypass w/ Relay Harness acts as another option. It is completely plug & play; NO splicing.

This DRL Bypass w/ Relay Harness serves as two things: 1) DRL bypass (eliminate)  ..  2) Standard Relay Harness for HID's

+1 for the great information. By the way, the position indicators and auto low beam work as usual, don't they?

[jRox]

Installing this DRL Bypass w/ Relay Harness simply eliminates the DRL's. This does not alter any other functions. By position indicators, do you mean turn signals? If so, then yes, they work as usual as they should since no other functions are changed. I'm not so sure what you mean about auto low beam.

Do you have the HID projector or non-HID headlights?

[kleanthis]

Installing this DRL Bypass w/ Relay Harness simply eliminates the DRL's. This does not alter any other functions. By position indicators, do you mean turn signals? If so, then yes, they work as usual as they should since no other functions are changed. I'm not so sure what you mean about auto low beam.

Do you have the HID projector or non-HID headlights?

I have the simple halogen lamb headlights with deflectors, not projectors, and I am considering of replace them with projectors and HID's. When I am saying position indicators, I mean the small lambs at the edge of the headlights. And the auto low beam is the position for turning the low beam or DRL on/off automatically, when you drive from lightful to dark places of the opposite..

[bluegts09]

I have the simple halogen lamb headlights with deflectors, not projectors, and I am considering of replace them with projectors and HID's. When I am saying position indicators, I mean the small lambs at the edge of the headlights. And the auto low beam is the position for turning the low beam or DRL on/off automatically, when you drive from lightful to dark places of the opposite..

Does your car have an auto on/off headlights? Over here in the US we didn't get that feature until recently on the new Touring Package for the 2009+ GTS which already comes with HIDs.

[jRox]

^Ahh I see. Thanks for clearing that up.

We don't have the feature, so I wouldn't be able to tell you if the auto low beam will work. However, I do know that the signal indicators (small lamps at the edge of the headlights aka parking lights) will work. You can see them working as they should in my clip.

[kleanthis]

Does your car have an auto on/off headlights? Over here in the US we didn't get that feature until recently on the new Touring Package for the 2009+ GTS which already comes with HIDs.

Are you serius?   No auto on/off headlights until now? Very useful feature and we have it standard here in Greece since the 2008 9th Lancers.. Of course, we don't have other features like sunroof (can you think about it? no sunroof in sunny Greece..  ), projector headlights except Evolution.. Unexceptable! And we still wait for Ralliart..  

[kleanthis]

Reading two days now about DRL bypass, I figured this out. We don't need DRL bypass here in Greece, since our Lancers are not equipped with DRL's. We have the auto on/off feature instead of DRL's. 

[MiserTwo]

Lucky Greece Lancer owners! Thats the only thing i hate about my lancer is the DRL's . How could i buy one of these relays from you?

[K Nguyen]

someone is selling this in the marketplace for cheaper price if you got the relay harness.

[jRox]

^Thanks for the info. I guess I have to get to 50 posts before I can even see/use the marketplace, lol.

All PM's replied.

[K Nguyen]

^Thanks for the info. I guess I have to get to 50 posts before I can even see/use the marketplace, lol.

All PM's replied.

I see you everywhere, I swear. You on ISS aren't you? The day I bought my Lancer, I went on this Mitsu forum, forgot what and you were selling your CF hood cause your parents wouldn't let you keep it right? It looked tough though.

[MiserTwo]

Yeah i guess i have to get 50 post too. I'm just gana comment every post with a " " lol

[icedtc]

I think i've asked before, but does this drl bypass/relay harness work if i don;t have HIDS?

I have angel eyes and really wanna get rid of these damn drl's.

Thanks very much. If I need HID's, could anyone reccommend a set that would go well with this dr bypass/relay?

TY VM

[jRox]

I see you everywhere, I swear. You on ISS aren't you? The day I bought my Lancer, I went on this Mitsu forum, forgot what and you were selling your CF hood cause your parents wouldn't let you keep it right? It looked tough though.

Lol. Yea, I used to be on ISS. I remember you even posted my car with my CF hood on like an official car ride thread. But that's a different story.

Yes, my parents wouldn't let me keep the CF hood, so I had to sell it.   

[jRox]

I spent the day completing and testing each DRL Bypass w/ Relay Harness. They have all been tested and confirmed to work 100% upon arrival. I have a total of 25 sets available.

I've also been able to test and confirm that the DRL Bypass w/ Relay Harness I provide will in fact work 100% with non-HID stock headlights.


**Please take note: I will be going on vacation from June 20-27th. This transaction must be completed ASAP, to ensure I ship your DRL Bypass w/ Relay Harness before June 20.

Thank you for your interest. 

[K Nguyen]

Can you guys tell me if this comes with the relay harness or not?

[jRox]

^Judging from the pic, I would say there is no relay harness--But it's a little hard to tell. If you can spread out all the cables and take a picture, I'd be able to tell you.

[icedtc]

Just wanted to let everyone know that  JRox's DRL bypass works like a charm and is very easy to install.

I have angel eyes without HID's and really wanted to be able to drive around without my low beams on. I ordered my drl bypass kit yesterday and it was in my mail today! We are both in NJ...so that's why so fast.

Anyways, I just wanted to let you all know that if your interested in his item, it's great!

Thanks again J, great product, especially that funkybeats is busy atm. Great Stuff!!!

[jRox]

^Thanks for the feedback. Glad it worked out for you.

I just came back from vacation. I have more sets that are ready to be shipped if anyone is interested. Feel free to PM me if you have any questions. Thank you. 

[MiserTwo]

I just need some help on installing it with out HID's 

[jRox]

^There's really not much to do. I will refer to the NAMES of the plugs found in my instructions: http://projectlancer.info/Howtos/DLRInstructions.pdf

For HID's, Male 9006 (Driver) & Male 9006 (Passenger) are originally plugged into the female Ballast plug. For STOCK Bulbs, Male 9006 (Driver) & Male 9006 (Passenger) are plugged into the female STOCK bulb plugs. This is the only change. Very simple.

[cRc`22]

Can you guys tell me if this comes with the relay harness or not?

that wire thats all twisted together on the bottom of the pic is the relay harness

[jRox]

Shipped out 4. 1 pending, 9 sets left.

[jRox]

BUMP

2 pending, 7 sets left.

[Makenza]

Question, if I were to order an HID kit, it comes with a Relay Harness, wouldn't that be the same as the harness you have here?
I was looking at it, and they are almost identical.

For example, K Nguyen's kit above has a relay harness, wouldn't that allow him to bypass his DRL's already?

[icedtc]

Question, if I were to order an HID kit, it comes with a Relay Harness, wouldn't that be the same as the harness you have here?
I was looking at it, and they are almost identical.

For example, K Nguyen's kit above has a relay harness, wouldn't that allow him to bypass his DRL's already?

I'm pretty sure a HID kit w/harness still does not have the DRL Bypass section which is needed. Now perhaps you could incorporate the DRL Bypass, so you don't have to buy 2 harness's. But i'm pretty sure you still need the section to disable the DRL's which is not included in a HID kit.

[cRc`22]

the relay harness just lets ur lights stay on 24/7 without flickers.. the relay harness / drl bypass .. bypasses the DRL.. lol

[jRox]

4 pending, only 3 sets left.

[jRox]

SOLD OUT

Thank you for all who purchased my product! I'll be making another batch for those who are interested. 

[jRox]

**Updated the video on the 1st page: Demonstrates compatibility with both Aftermarket HID's and OEM STOCK lights.

[chelecuche]

if my HID  kit comes with a relay harness im goign to need to take of my HID relay harness and put you DRL bypass with the relay that comes with you kit?.....

[jRox]

^The DRL Bypass circuitry is constructed WITHIN a standard Relay Harness. So yes, you would replace it.

[waiting89]

the relay harness just lets ur lights stay on 24/7 without flickers.. the relay harness / drl bypass .. bypasses the DRL.. lol

Well not every relay harness would do that, because I got one and it still flicker I had to add a capacitor at first so it could stay 24/7 while driving on, but now I just made my own DRL lol  using the same relay harness tho...

[jjhohmann]

Just got my drl bypass from Jrox in the mail the other day and had a nice day off to put it on today. Install was extremely easy and didn't take very long at all. I think total time I spent on it was probably about 30 minutes and that's only because once I saw that the bypass worked properly I spent the rest of the time hiding any excess wiring and making it look as pretty and professional of an install as possible. I'm using the drl bypass with stock lights... no HID's at this point in time, although I do plan on getting some in the future. So far the bypass works perfectly and I've had no problems with it at all. I'd highly recommend this as a solution for anyone looking to bypass the DRL system without messing with any of the stock wiring. Thanks for an easy and effective fix to my annoying DRL's!! 

[jRox]

^Thanks for the great review and positive feedback! 

Just an update: I plan to have another batch of DRL Bypasses tested & ready to be shipped by mid-next week (July 21-24).

[MiserTwo]

Yeah i just installed it with my HID's no flicker and i can finally have my lights off!Thanks Jrox great product u have 

[jRox]

^Thanks for your purchase. Glad it worked out for you.  

I spent the day completing and testing each DRL Bypass w/ Relay Harness. They have all been tested and confirmed to work 100% upon arrival. I have a total of 26 sets available. I can ship out the DRL Bypasses as early as tomorrow--depending if your payment clears.

If you are interested in purchasing a DRL Bypass w/ Relay Harness, please PM me with your PayPal email address so I can send an invoice your way. Thank you!

[Ajz]

install it work great

[jRox]

^Awesome! Thanks for your purchase. 

2 pending, 20 sets left.

[SuprNova]

I just got one of these bypasses last week and it works perfectly. Before I got it I had to swap my DRL's with my parking lights in order to show off my angel eyes, but they flickered a bit and weren't very bright and even made the power inverter fail because of the low-voltage. Since I got this I was able wire everything back as normal and now don't have to worry about leaving my angel eyes on all day as DRL's and messing them up again. Now they show bright and beautiful. This a great plug and play 5 minute install product. For my HID's and angel eyes it was worth every penny. Thanks again, jRox.

[jRox]

^Thanks for the positive feedback!

2 pending, 14 sets left.

[jRox]

BUMP for interest!

[vlad]

just got it today. install was pretty easy except i dont know who put my car together but all the bolts and nuts are extremely tight and i couldnt get enough leverage to unscrew the ground screws where you showed them so i used other ones. other than that works great and thanks for the product. oh just one question though when my car is not started but it is in on position i hear a sound coming from somewhere near the battery, sort of like humming is that normal?

[Benchinapark]

can we do a payment plan? =D

[jRox]

just got it today. install was pretty easy except i dont know who put my car together but all the bolts and nuts are extremely tight and i couldnt get enough leverage to unscrew the ground screws where you showed them so i used other ones. other than that works great and thanks for the product. oh just one question though when my car is not started but it is in on position i hear a sound coming from somewhere near the battery, sort of like humming is that normal?

That's great news. Thanks for the positive feedback.

The noise you are hearing may just be electronic noise coming from your HID ballasts. The noise lessens and dies out as time goes on. Mine also do the same. It shouldn't be anything to worry about.

[Benchinapark]

can we do a payment plan? =D

[jRox]

No sorry. I can only take the payment in full.

[Benchinapark]

No sorry. I can only take the payment in full.

how aboutttt
i pay you 3/4s
then when i get the product ill pay the rest?

[Ico]

how aboutttt
i pay you 3/4s
then when i get the product ill pay the rest?

ghetto?

[jRox]

how aboutttt
i pay you 3/4s
then when i get the product ill pay the rest?

No thanks. I will only take the payment in full.

**Only 8 sets left.

[jRox]

BUMP

Only 5 sets left.

[ROTHEEE]

i want/ need one =]

[jRox]

I spent the day completing and testing each DRL Bypass w/ Relay Harness. They have all been tested and confirmed to work 100% upon arrival. I currently have a total of 18 sets available. I can ship out the DRL Bypasses as early as tomorrow--depending if your payment clears.

If you are interested, please send me a PM with your PayPal email login, so I can send an invoice your way. Thank you! 

[jRox]

They are selling quick!

3 pending, only 10 sets left.

[jRox]

1 pending, only [color="#FF0000"]4[/color] sets left.

[spentplsr711]

Works great love that I dont have to have my lights on at night now. +1

[waiting89]

OMG it works SUPER great! +1

[hmoobher]

I agree, works perfect, just wish the wire was longer

[waiting89]

I agree, works perfect, just wish the wire was longer

I didnt have any problems with that.....

[hmoobher]

I did, obviously

[waiting89]

I did, obviously

how come?

[hmoobher]

wish the wire was longer

[ROTHEEE]

i have this. had no problems what so ever...i just think using only one ballast is very safe? and would shorten the life of the ballast?

[jRox]

Thanks for all the positive feedback!  

I agree, works perfect, just wish the wire was longer

Sorry, I have no control in the length of the wires of the DRL Bypass w/ Relay Harness. I simply construct an electric circuit (DRL Bypass) within the Relay Harness. Try mounting it under the radiator plate (plastic piece). I used zipties to hold it in place and had no issues with the length.

i have this. had no problems what so ever...i just think using only one ballast is very safe? and would shorten the life of the ballast?

One ballast? The DRL Bypass w/ Relay connects to both ballasts, both are being used.



**1 pending, only 2 sets left.

[waiting89]

GREAT work and I mean fastest shipping ever saw, order it and the next day was in my hand thnx u!!

[Mephiles029]

Cant wait to get my Bypass huh damn clock go faster 

[Rican_GTS]

Well, today I installed my HID's and I jave to admit it wouln't have been completed withou the bypass/relay harness I got from JRox. +1 brother! Awesome product and it works like you described it would. I'm loving not having DRL's anymore and my HID's. Keep Up the good work J!

[Dennis]

I installed this on Friday and works great! No more DRL. Then used my other wiring harness I already had to install my fog light HIDs.

[Mephiles029]

I finally killed them DRL's YES        

Thanks jRox your product works great finish installing them a few hours ago and man they work.

[jRox]

Thanks for all the positive feedback! 

BUMP! Couple sets still available, ready to be shipped.

[sdlancer]

i just got mine dude it works great thanks....oh and i heve them with the oem lights

[jRox]

^Thank you for your purchase! 

I was able to make & test a few more over the weekend. I have 9 sets in stock. 

[nelsondevicenci]

Jrox, question i have a 2008 gts with oem projectors my frien change pins to the projector works then are exactly as the non hid reflectors, but i want the DRL not on my projectors because always i need to leave on position, and i want the DRL work in the projector housing like the high beam on the non projector you can figure out something?

Thanks let me know.

[jRox]

^PM sent.

Only have 1 set left in stock.

I'll be building & testing more during the week. I plan to about 15 sets available, ready to be shipped by the end of the week. Thanks again for all who purchased! 

[aferreir]

Our 08/09 Lancers have Daytime Running Lights. "The DRL signal is NOT a constant DC (6V, 9V, etc.) but rather a square waveform peaking at 14VDC and a frequency of about 60Hz (this is better for the bulb longevity than running them at 6V)"

If you run a set of HID's in the Lancers, the DRL's will cause your HID lights to flicker. Now to avoid the flicker, you can have your lights ON all the time. OR, you can simply BYPASS the DRL's. There are several ways to "BYPASS" the DRL's--which may include splicing the wiring harness. Some people would rather not splice or interfere with the OEM wiring, so THIS DRL Bypass w/ Relay Harness acts as another option. It is completely plug & play; NO splicing.

This DRL Bypass w/ Relay Harness serves as two things: 1) DRL bypass (eliminate)  ..  2) Standard Relay Harness for HID's

Supposebly i heard, if you disable the DRL's you can install the HID's no problem, but if you want them on you need a bypass.

[jRox]

^I don't really understand what you're trying to say. The DRL's can not be utilized when running HID's.


I was able to build & test several more DRL Bypasses. They are confirmed to work 100% upon arrival. I have a total of 15 sets in stock.

[jRox]

1 pending, only 11 sets left.

[jRox]

1 pending, only 7 sets left.

[jRox]

2 pending, only 3 sets left.

[jRox]

Updated original post with Vehicle Compatibility.

I completed & tested more DRL Bypasses over the weekend.

2 pending, only 10 sets left.

[jRox]

BUMP

Only 4 sets left.

[SixFeetDeep]

Very fast shipping & the kit worked perfectly!
+1 Rep for you my friend.
I also left you a PM....Thanks again!

I CAN SEE NOW!!!!!! 

[projectshark]

dooooodeeee i need this harness im dying to put my h.i.ds in already

[lancergts21]

does he come on here every often or just sometime, cuz i left him a message and still waiting for the replies....or if any body know him and can contact him that i want to purchase a set from him id appreciate it thanks....

[projectshark]

i spoke with him over a week and a half ago and said he was sold out and he was busy qwith finals and everything so idk i havent heard back from him since then either

[lancergts21]

i spoke with him over a week and a half ago and said he was sold out and he was busy qwith finals and everything so idk i havent heard back from him since then either

oh ok thanks for the info....

[Mephiles029]

Its been 2months and the DRL Bypass w/ Relay Harness is working great thanks jrox 

[projectshark]

just rub it in lol

[waiting89]

just rub it in lol

its been a good 3 months and also working good lol srry i just had to do that lmfaoo

[jRox]

Thanks for

i spoke with him over a week and a half ago and said he was sold out and he was busy qwith finals and everything so idk i havent heard back from him since then either

Sorry guys. I've been caught up with finals. I finally had found some time to build & test more DRL Bypass w/ Relay Harnesses. I only have 8 sets available, ready to be shipped. However, all sets are reserved for those who PM'd me during the 2 weeks I've been busy. Due to high demand, I must sell them on a "First Pay, First Serve" basis. If someone backs out, I'll update the thread.

**Please Note: I will be going out of the country for vacation December 25 - January 13.

For those interested in purchasing a set, I'll try and have more available before I leave for vacation.

Its been 2months and the DRL Bypass w/ Relay Harness is working great thanks jrox 

Thanks for the positive feedback! 

[jRox]

A couple customers have backed out. I have 2 sets available, ready to be shipped. If you're interested, please PM me with your PayPal email login so I can send an invoice your way. Then you'll be able to make the payment. Thank you!

[projectshark]

got my harness in the mail yesterday great product, my h.i.ds look awesome and no more d.r.l!!!

[thej.hurley@gmail.com]

 is this still available to buy??

[ddboy]

where is jrox?
i need a set, and i have sent him 2 PMs, but the fool has not replied back!!!

[bluegts09]

where is jrox?
i need a set, and i have sent him 2 PMs, but the fool has not replied back!!!

2 Posts back **Please Note: I will be going out of the country for vacation December 25 - January 13

He just got home and settled in. Give him until like next week, plus he will need to make more.

[ddboy]

2 Posts back **Please Note: I will be going out of the country for vacation December 25 - January 13

He just got home and settled in. Give him until like next week, plus he will need to make more.

thank you for the update. i know i'm being impatient, but i just bought a set of Philips HID, and i don't want to install them without this wiring harness.

[bluegts09]

thank you for the update. i know i'm being impatient, but i just bought a set of Philips HID, and i don't want to install them without this wiring harness.

Yea, no problem. I know the feeling! 

I have stuff sitting in a bin waiting for a warm day for me to install onto my car... It sucks looking at this nice stuff and realising it's about 30 or lower outside and too cold to work 

[ddboy]

Yea, no problem. I know the feeling! 

I have stuff sitting in a bin waiting for a warm day for me to install onto my car... It sucks looking at this nice stuff and realising it's about 30 or lower outside and too cold to work 

sux being you my friend!!! JP 
what are you going to install when that sunny day rolls around?

[jRox]

where is jrox?
i need a set, and i have sent him 2 PMs, but the fool has not replied back!!!

Sorry about that. Just back from vacation a few days ago. Hope everyone enjoyed their Holidays. Been working around the clock to get these DRL Bypasses built, tested, and ready to be shipped. I've replied all PM's in the order they were received. If I missed you, please send me another PM.

I currently have 14 x DRL Bypass w/ Relay Harnesses available, ready to be shipped. I've tested & confirmed its 100% proper working order. I have plenty of customers waiting in line for a set. If I do not receive a response/payment from you, I will have to cancel the invoice and sell to another interested customer.

**Please Note: Due to high demand, I must sell them on a "First Pay, First Serve" basis.

Thank you for your patience! 

[jRox]

I'm still waiting on a few to respond and/or make the payment. If I do not receive a response/payment soon, I will have no choice but to cancel the invoice and sell to another interested customer. For those who have already sent the payment, the earliest I can ship them out will be tomorrow. USPS is closed today for MLK: http://www.usps.com/communications/newsroom/calendar/federalholidays.htm

I still have a few available, ready to be shipped. If you'd like to purchase a set, please send me a PM with your PayPal email login so I can send an invoice your way. Thank you!

[xtremebrdr]

Thanks jRox Keep up the good work!

[ddboy]

Thanks jRox Keep up the good work!

+1 rep. thanks jrox.

[jRox]

Thanks for the positive feedback! 

All orders have been shipped. I've also PM'd everyone their tracking number. I still have a few available for those who are interested.

Only 5 sets left.

[xtremebrdr]

recieved it yesterday. installed today on the stock headlights (still awaiting my hids) works like a charm.
amazing product awesome seller! keep up the good work. +1 rep!

[ddboy]

I don't know if this has been mentioned or not. But if all the lights are off, then you turn on your high-beams, the low-beams will also turn on. I'd say leave the high-beams on until your HIDs (low-beam) reach their full brightness. If you turn the high-beams on, off, on, off, on, off, then it's most likely damaging your HIDs.

Be careful!!!!

[kirtangl]

Hey ahh... I have the auto lights on my car, the ones that come on when it gets dark... Just wondering, does this mean i do not have DRL's? Cos I have no idea lol... and I was going to get some HIDs but i want to confirm this first.

[bluegts09]

Hey ahh... I have the auto lights on my car, the ones that come on when it gets dark... Just wondering, does this mean i do not have DRL's? Cos I have no idea lol... and I was going to get some HIDs but i want to confirm this first.

Reading two days now about DRL bypass, I figured this out. We don't need DRL bypass here in Greece, since our Lancers are not equipped with DRL's. We have the auto on/off feature instead of DRL's. 

No you do not if you have the Auto on/off feature.

[gfxcraig]

Pm sent to Jrox.

Definitely interested in getting a Bypass.

[jRox]

All PM's replied. If I missed you, please send me another PM.

I have a total of 20 x DRL Bypasses available, ready to be shipped. I finished testing each one individually today, and they are all confirmed to work 100% upon arrival.

**Please Note: Due to high demand, I must sell them on a "First Pay, First Serve" basis.

PM me if you're interested. Thanks! 

[chaos20104]

hey jrox whats so different about your relay harness and the one from ddm tuning? they do the ame thing correct?

[jRox]

hey jrox whats so different about your relay harness and the one from ddm tuning? they do the ame thing correct?

What DDMTuning and most other companies offer are anti-flicker kits. Yes, they do resolve the HID flicker issue. However, they function differently.

With an anti-flicker kit installed:

Position 0 - LOW Beams ON
Position 1 - Parking lights ON, LOW Beams ON
Position 2 - Parking lights ON, LOW Beams ON


With my DRL Bypass properly installed, all lights will assume normal function:

Position 0 - All lights OFF, DRL's OFF
Position 1 - Parking lights ON, DRL's OFF
Position 2 - Low beams ON, Parking lights ON

[furyschild]

Jrox ,, i want one just one problem , this damm snowstorm , will be in touch so we can meet by this weekend

[jRox]

Jrox ,, i want one just one problem , this damm snowstorm , will be in touch so we can meet by this weekend

No worries. I'll hold one aside for you. We got about 6 inches of snow here.

[furyschild]

thanks , we got about 12-18" here so far more coming.

[jRox]

thanks , we got about 12-18" here so far more coming.

Yup, we got about that much now. Should be fun digging to get to my car, lol.

I've shipped all orders and PM'd all tracking #'s.

2 pending, only 6 sets left.

[furyschild]

call you friday afternoon , set up pick up on saturday if possible?

[Mephiles029]

I dont know if any one is having a problem but this happen to me like five times already. When i turn on my car and turn on my low beam my hids dont turn on. Dont get me wrong the bypass does its job. I have to switch it on and off a couple of times to turn but nothing. Then i just drive off with my highs and they come on. They also had turn on and off while i was driving @ night 3 times in a row. So not sure wuts the problem the hids are working fine and so is the bypass/relay harness. Think it could be the computer having a glitch.

[bluegts09]

I dont know if any one is having a problem but this happen to me like five times already. When i turn on my car and turn on my low beam my hids dont turn on. Dont get me wrong the bypass does its job. I have to switch it on and off a couple of times to turn but nothing. Then i just drive off with my highs and they come on. They also had turn on and off while i was driving @ night 3 times in a row. So not sure wuts the problem the hids are working fine and so is the bypass/relay harness. Think it could be the computer having a glitch.

Make sure all connections, including the 2 grounds on the bypass, are setup correctly. Also try connecting the HIDs directly to the cars OEM sources. Then turn the car on and see if the HIDs turn on with no problems. There is also a fuse in the Bypass but if it is working sometimes but not others it is not the fuse.

[jRox]

Make sure all connections, including the 2 grounds on the bypass, are setup correctly. Also try connecting the HIDs directly to the cars OEM sources. Then turn the car on and see if the HIDs turn on with no problems. There is also a fuse in the Bypass but if it is working sometimes but not others it is not the fuse.

You are awesome! You always answer everyone's questions in my thread. 

Memphiles, it sounds like you may have an intermittent connection. First, check the fuse (located on the red power cable). Then, make sure all your plugs are correctly seated. After, check to see that both grounds are properly bolted. You can also follow bluegts09's advice to help isolate the problem.

[bluegts09]

You are awesome! You always answer everyone's questions in my thread. 

Memphiles, it sounds like you may have an intermittent connection. First, check the fuse (located on the red power cable). Then, make sure all your plugs are correctly seated. After, check to see that both grounds are properly bolted. You can also follow bluegts09's advice to help isolate the problem.

Hahah you are welcome! 

[Mephiles029]

Thanks JROX and Blue im gunna check on that now lets see wut the problem could be

[whomattjones]

Hey Jrox, do you have anymore relay harness avaliable yet?

[jRox]

Just to serve as an update, I recently completed building 40 x DRL Bypasses. However, we were hit by a snow storm just a couple days ago so the weather isn't exactly ideal to individually test all the DRL Bypasses. I would have these available by tonight, but unfortunately, I don't have a access to a garage. I'm hoping for better weather in the next couple of days or so. Please bare with me if time permits. I'm trying my best to have these available to those interested. Thank you for all your patience. 

[s21197]

Instead of hooking this harness up to ground, can I just hook it up to a sparate bulb to act as the drl?

[whomattjones]

Cool, thanks for the update! I wanted to try to get my hids done next weekend, but I understand the weather, I'm stationed in Minot, ND and it sux lol!

[jRox]

Sorry for the long wait! All those interested have been PM'd. If you didn't receive a PM, please send me another, I might have missed you. I have a total of 40 x DRL Bypass w/ Relay Harnesses available, ready to be shipped. They have all been individually tested & confirmed to work 100% upon arrival. If you'd like to purchase a set, please send the payment via PayPal:

1. Shipping within US: $60 USD - via USPS First Class Mail w/ Tracking & Confirmation
2. Shipping to Canada: $65 USD - via USPS First Class Mail (USPS does not offer Tracking & Confirmation for mail sent outside the US)

My PayPal email: heymynameisjae@gmail.com

As soon as your PayPal payment clears, I will ship out your DRL Bypass the same day or the following day after.

**Please note your Forum Name and Forum in the PayPal Notes section. Thank you! 

[jRox]

Shipped out 10 sets today. I've PM'd you all your tracking #'s.

1 pending, 29 sets available.

[ethan4142]

i received my drl bypass. very fast shipping.  i cant wait to install everything. thanks jrox

[jRox]

i received my drl bypass. very fast shipping.  i cant wait to install everything. thanks jrox

Awesome. Let me know how it works out for you. 

1 pending, 22 sets available.

[jRox]

2 pending, 19 sets available.

[whomattjones]

Hey, I installed my Harness last week and it works great!! I haven't really posted any pics up on this site yet, but I'mma post some soon!

[zenock]

pmd. 

[jRox]

pmd. 

PM replied. 

1 pending, 7 sets left.

[spekil]

just ordered and waiting for its fast shipping... Can't wait to see those Angel Eyes with this drl bypass..

[basik19]

Just sent you a pm and paypal.. Can't wait to test them!

[jRox]

All PM's replied!

1 pending, only 4 sets left.

[zenock]

got my bypass yesterday installed it this morning with my hangover btw happy belated st. patricks people...  like everyone says super fast shipping. works perfect now i just need hids. thanks jrox! gave rep and +10 for the bypass.. 

[taico]

I just went to a shop and they did both of mine for 100 flat. So if anything goes wrong now they are liable for it which is awesome. they run great now. i was gonna buy yours jrox but i just felt more safe with a shop. im not downing your product at all either. keep it up man and good luck

[jRox]

I have a total of 15 x DRL Bypasses available, ready to be shipped. They have all been tested & confirmed to work 100% upon arrival.

Shoot me a PM if you're interested.

[spekil]

Just received my bypass today but not ready to install yet. Maybe this weekend..

THanks Jrox +1

[gangmobb]

Do I need these if I have AEs

[spekil]

Not really. I just really want to Emphasize the seduction of Angel Eyes by turning off my DRL. At night, there are streets,esp. main roads, that have sufficient lights that even I turn off my Low beams, I can still drive on it.

So it's really up to you.

[gangmobb]

im thinking of getting these but are DRLs like lights i cant just take out? lol like remove bulb?  or are they the same as those meduim beams like the ones you get after you turn that lever on the left of the sterring wheel? are they the same bulbs only after you turn lever it hards more electricity to get the brighter light? 

[jRox]

im thinking of getting these but are DRLs like lights i cant just take out? lol like remove bulb?  or are they the same as those meduim beams like the ones you get after you turn that lever on the left of the sterring wheel? are they the same bulbs only after you turn lever it hards more electricity to get the brighter light?

The DRL's run through your Low Beam bulb.

[gangmobb]

thats gay.. i gots no money to get these but man you get great rep on here of them working and i would choose yours over any i see at store or anit flicks kits but i hate it that i cant cant these if i get hids =( theres no point in getting HIDs if i cant have this youve done a great job tho jrox keep  it up forreal

[jRox]

thats gay.. i gots no money to get these but man you get great rep on here of them working and i would choose yours over any i see at store or anit flicks kits but i hate it that i cant cant these if i get hids =( theres no point in getting HIDs if i cant have this youve done a great job tho jrox keep  it up forreal

Thanks man. I've been serving the 2008+ Lancer community for nearly a year now. 

You can still run HID's. You'll just have to keep them ON 24/7 to avoid the HID flicker.

[jonmuhlach]

Jrox, your the bomb.... I already have your bypass and sneaker helped me to install it and they worked just great, no more flickering...... 1 rep for you bro and awesome review...... how bout warranty, 

[gangmobb]

Thanks man. I've been serving the 2008+ Lancer community for nearly a year now. 

You can still run HID's. You'll just have to keep them ON 24/7 to avoid the HID flicker.

oh that would be awful :/ yo how many you got left? im thinking of getting a set but im counting my moneys =/ thanks dude

[jRox]

I have 14 sets available.

[jRox]

1 pending, 12 sets available.

[rizocreations]

j..you really Rox man.

I ordered the DRL bypass. (last week i think? time flies, don't remember) Shipping and delivery was speedy and perfect. The bypass worked like a charm with my regular lights. Hooked up HID kit and it was flawless. Job almost looks professional and didn't have to worry about cutting any wires and don't have to leave HID on all the time. Install took roughly 1 hour. Could have been faster, but never did this before. Had help from an experienced friend too who doesn't have a lancer.

I'd recommend this to anyone wanting a HID kit.

Keep up the good work jRox. i'd give you rep if i knew how. But left a positive feedback.

[jRox]

I really appreciate feedback. Thanks, enjoy! 

1 pending, 7 sets available.

[jRox]

1 pending, only 5 sets left

[kevvvo11]

If i have my lights on all the time. Lows and Fogs, will i still have flicker?

[kevvvo11]

NVM, found my answer!  Thanks :]

[gangmobb]

How many left jrox? :-)

[jRox]

How many left jrox? :-)

PM sent.

Made a few sets over the weekend.

3 pending, only 3 sets left.

[kevvvo11]

If i drive with my lights on all the time anyways, do i have to still worry about flicker? I plan on having my lights on every time i drive. Thanks1

[Sky tm]

If i drive with my lights on all the time anyways, do i have to still worry about flicker? I plan on having my lights on every time i drive. Thanks1

no. therefore you do no need this kit.

[kevvvo11]

+1 Thanks Man!

[sbdrew5234]

+1 for the drl bypass should have got it a long time ago instead of the basic harness i had.
veryyyyyyyyy happy now that i can turn my freakin hid's off and not blinding people during the day lol some people would get pissed off by that.

[gangmobb]

Yo jrox Idk Wats wrong woth mine Idk if its plugged in right but drls still on man n the black box attached makes a really loud rattlying noise.. the passenger side mainly where idk if its plugged in right Thx

[jRox]

Yo jrox Idk Wats wrong woth mine Idk if its plugged in right but drls still on man n the black box attached makes a really loud rattlying noise.. the passenger side mainly where idk if its plugged in right Thx

I test & confirm each DRL Bypass before I ship them out. That being said, it is more than likely user-installation error. You'd be surprised how many people make silly mistakes during installation.

I've PM'd you some troubleshooting steps.

[PaddleshifteR]

genius!................

[jRox]

Made a small batch over the weekend.

4 pending, 8 sets available.

[Fallorain]

received and installed my drl bypass.  works great! not sure where to place the little black box but all else is well.  using it with oem stock lights for now.  hids coming in.
thx jRox!

[Corey]

Will be contacting you in the next month or so!

[jRox]

Will be contacting you in the next month or so!

Sure np. Shoot me a PM when you're ready.

BUMP for interest!

[Cntrl]

I might be needing a bypass soon.  I was informed about these HIDs from DDMTUNING, and plan to get them probably next month.  Will the 35w 8000k kit work fine with your bypass?

[gtsmike]

yeah, i got the ddm 8000k 35w and the harness. works perfectly.

[jRox]

I might be needing a bypass soon.  I was informed about these HIDs from DDMTUNING, and plan to get them probably next month.  Will the 35w 8000k kit work fine with your bypass?

The majority of those who purchased from me, have/had DDM Tuning HID's. It should work no problem.   

[Cntrl]

The majority of those who purchased from me, have/had DDM Tuning HID's. It should work no problem.   

awesome!  thanks for the reply.  And just one more question, I only need the bypass for the lowbeams correct?  I wont need one for the High beams or fogs right?

[jRox]

awesome!  thanks for the reply.  And just one more question, I only need the bypass for the lowbeams correct?  I wont need one for the High beams or fogs right?

The DRL signal is only passed through the Low Beams. So yes, only 1 x DRL Bypass for the Low Beams is necessary.

[BlackGTS09]

well i installed the ddmtuning hid kit with jrox relay harness and everything is working perfect. the lights look amazing. best money ive spent on the car so far. 

[jonmuhlach]

Hey Jrox, my buddy here bought an outlander 2010. Can he also use your DRL Bypass?

[jRox]

well i installed the ddmtuning hid kit with jrox relay harness and everything is working perfect. the lights look amazing. best money ive spent on the car so far. 

Thanks for the positive feedback! 

Hey Jrox, my buddy here bought an outlander 2010. Can he also use your DRL Bypass?

I haven't tested my DRL Bypass on a 2010 Outlander. However, it's probably no different than the 2007-2008 Outlanders [confirmed]. He can purchase my DRL Bypass and if it's confirmed to be incompatible, I have no problem issuing him a full refund. 

[jonmuhlach]

ok i will let him know. btw, my DRL is having this problem. is it normal that sometimes the right side will not turn on, but when i turn it off and turn it back on it will turn on?

[jRox]

ok i will let him know. btw, my DRL is having this problem. is it normal that sometimes the right side will not turn on, but when i turn it off and turn it back on it will turn on?

Sounds like you may have an intermittent connection. Be sure that both your plugs are correctly seated and your grounds are properly bolted.

[jonmuhlach]

sneakerhi helped me connecting it, i just connected it to the battery for negative and positive wires....

[8709catherine]

I installed my Harness and it works great!! Thanks jRox

[jRox]

I installed my Harness and it works great!! Thanks jRox

Thanks for your kind words! 

[jRox]

After providing the DRL Bypass for over a year now, I've decided to offer it at a lower cost.

Original Price:  $60 shipped
*REDUCED Price:  $45 shipped


I've also changed my Return/Exchange Policy:

*Return/Exchange:
Void after 30 days from date of delivery.
Void if the DRL bypass is tampered in anyway. I will know, I made it.
Valid only for defected/faulty products.
If it's been over 30 days since date of delivery, I can offer a repair service. Contact me for more info.

You can now purchase my DRL Bypass through Ebay. I recently found out someone also began to provide the DRL Bypass on Ebay. If you check out his ad, you'll see that he made no effort to describe his own and virtually copied my description of this product. Please show your support by purchasing my DRL Bypass as I've been serving the Lancer community for over a year.

Thank you for all your past/present/future support! It's been a pleasure to serve you all.

All transactions will now take place via Ebay:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=180515802509

[Cntrl]

After providing the DRL Bypass for over a year now, I've decided to offer it at a lower cost.

Original Price:  $60 shipped
*REDUCED Price:  $45 shipped


I've also changed my Return/Exchange Policy:

*Return/Exchange:
Void after 30 days from date of delivery.
Void if the DRL bypass is tampered in anyway. I will know, I made it.
Valid only for defected/faulty products.
If it's been over 30 days since date of delivery, I can offer a repair service. Contact me for more info.

You can now purchase my DRL Bypass through Ebay. I recently found out someone also began to provide the DRL Bypass on Ebay. If you check out his ad, you'll see that he made no effort to describe his own and virtually copied my description of this product. Please show your support by purchasing my DRL Bypass as I've been serving the Lancer community for over a year.

Thank you for all your past/present/future support! It's been a pleasure to serve you all.

All transactions will now take place via Ebay:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=180515038976#ht_2047wt_1165

You'll be getting a purchase from me very shortly.  Like next week when I get paid!

[keith6]

Thank you very much, this has changed my decision and i will be purchasing asap...one question though, if i buy a kit from ddm tuning and this bypass is that ALL i will need for the installation?

[jRox]

You'll be getting a purchase from me very shortly.  Like next week when I get paid!

Sure thing. I re-listed the DRL Bypass, so here's the new link: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=180515802509

Thank you very much, this has changed my decision and i will be purchasing asap...one question though, if i buy a kit from ddm tuning and this bypass is that ALL i will need for the installation?

Yes sir. An HID kit + DRL Bypass is all you will need for the installation. 

[jRox]

BUMP for Sunday!

[lowkeyneon]

just ordered mine today from jrox.... cant wait to finaly get my HID's done right

[rgdft]

waiting for mine to get here! now i can install my HIDS hopefully on saturday cause i still have no idea how hahaha

[jRox]

BUMP for Friday!

[stenguyen1]

hey there ppl selling relay harness. so my question is that the same as your but you added the drl bypass? and what is the difference?

[jRox]

hey there ppl selling relay harness. so my question is that the same as your but you added the drl bypass? and what is the difference?

Other people sell just a standard 9006 Relay Harness. It will not function the same as my DRL Bypass. A standard 9006 Relay Harness basically sources clean power straight from your battery, rather than the headlight plug.

I build an electronic circuit specifically designed to eliminate the DRL's. I then construct this circuit WITHIN a standard 9006 Relay Harness; Hence, why they look similar. They both do not function the same. A standard 9006 Relay Harness alone will not eliminate the DRL's.

[jonmuhlach]

Jrox, will it work with my 55w hid kits 9006?

[jRox]

Jrox, will it work with my 55w hid kits 9006?

Yes, it should work no problem. I also run a 55w HID kit along with my DRL Bypass. 

[usmcbigw]

I am looking at dropping in an HID setup and would love to know where to get this DRL bypass. I just need the info on where to go so i can order it?

[furyschild]

I am looking at dropping in an HID setup and would love to know where to get this DRL bypass. I just need the info on where to go so i can order it?

It's easy , PM Jrox ^ , He will get back to you and tell you details , He makes them , very high quality , tests each one prior to shipping and works great. These are not the same as crappy one's on e-bay ( unless its Jrox's ad on e-bay,lol)

[jRox]

It's easy , PM Jrox ^ , He will get back to you and tell you details , He makes them , very high quality , tests each one prior to shipping and works great. These are not the same as crappy one's on e-bay ( unless its Jrox's ad on e-bay,lol)

Thanks Greg. You can actually find my DRL Bypass on Ebay, lol. 

I am looking at dropping in an HID setup and would love to know where to get this DRL bypass. I just need the info on where to go so i can order it?

Here ya go:  http://cgi.ebay.com/ebaymotors/2008-09-10-Lancer-HID-DRL-Bypass-w-9006-Relay-Harness-_W0QQcmdZViewItemQQhashZitem2a07948d8dQQitemZ180515802509QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

[jRox]

BUMP! Always have them in stock. 

[jRox]

BUMP! Confirmed compatibility with 2007 Galant.

[jRox]

BUMP for Saturday!

[jRox]

BUMP for Thursday!

[jRox]

BUMP for interest!

[jRox]

BUMP for Sunday!

[jRox]

BUMP for Wednesday!

[kabome]

Hi Jrox,

For your DRL bypass does it have the capability to provide a control signal that would be active when DRLs would normally be active that could be utilized to a relay or switch to another circuit to control alternate lights to the DRL (such as wiring in Angel eyes or LEDs, etc.)?

[jRox]

Hi Jrox,

For your DRL bypass does it have the capability to provide a control signal that would be active when DRLs would normally be active that could be utilized to a relay or switch to another circuit to control alternate lights to the DRL (such as wiring in Angel eyes or LEDs, etc.)?

Please refer to my instructions: http://projectlancer.info/Howtos/DLRInstructions.pdf

You'll see that only the Driver-side Headlight Plug is used with the DRL Bypass. You can use the Passenger-side Headlight Plug as it still provides the DRL signal.

[kabome]

I understand that the regular plug would still provide the DRL signal however that same plug would provide the headlight-on signal as well when its engaged (full power).

I'm a computer engineer myself and have a rough idea of how you're separating/suppressing the DRL signal however I was just wondering if you've done it in such a way where that signal itself or an indicative signal could be isolated to a separate lead from your circuit?

[jRox]

I understand that the regular plug would still provide the DRL signal however that same plug would provide the headlight-on signal as well when its engaged (full power).

I'm a computer engineer myself and have a rough idea of how you're separating/suppressing the DRL signal however I was just wondering if you've done it in such a way where that signal itself or an indicative signal could be isolated to a separate lead from your circuit?

I see what you're saying. Unfortunately, this design contains no separate lead to produce this indicative signal.

[jRox]

BUMP for Wednesday!

[hmoobher]

I got a buddy that needs one, I'll let you know

[Cntrl]

I'm still interested in getting one of these from you, just need to wait til funds allow it.  Had unexpected expenses come up recently, thus delaying my plans to get HIDs on my lancer.

[hmoobher]

yo cntrl, come out to one of our meets!

[jRox]

I got a buddy that needs one, I'll let you know

Sweet! Thanks for spreading the word.   

I'm still interested in getting one of these from you, just need to wait til funds allow it.  Had unexpected expenses come up recently, thus delaying my plans to get HIDs on my lancer.

Cool, no problem. I always have them in stock, so there's no rush. 

[gkuzek]

This bypass is really neat but I am looking for something else.  In position 0 with your bypass, the DRLs are off, where I live it's the law to have working full time DRLs, is there anything you could provide jrox or does anyone know of any type of fix that would work so that once I turn my car on, my HIDs are on aswell?

Also, I got an issue with my LED tail lights where the lights on the trunk are not on but the ones on the body are.  And some of you may know this also has an affect on the cruise control.  Golyadkin suggested swithing a red and black wire a little up the harness, I tried it on one side and it never changed anything and on the other side I never saw a red and black wire.

Thanks

[gtsmike]

if you need drl where you live, dont use the bypass but then your hid's will be on all day. running your hid as drl will cause different current to them resulting in flicker. running your hid's all day as well has been shown to shorten their life span... at least of the bulbs anyways.

with regards to the cruise control, there's a thread on here explaining the fix. you have to get a resistor hooked up so that the cruise control doesnt malfunction. im sorry i cant tell you off hand how much ohms is the resistor but its in another thread somewhere.

[furyschild]

5w resistor , there's a link to how they look hooked up ,  http://clubcj.net/viewtopic.php?t=1395&start=0

[gtsmike]

^^ fury, is that pinned anywhere?

 it should be pinned in the Knowledge Base. alot of people will need that, including me if i ever decide to get the led tails.

[furyschild]

^^ fury, is that pinned anywhere?

 it should be pinned in the Knowledge Base. alot of people will need that, including me if i ever decide to get the led tails.

Its in there somewhere, I know this because i posted it there too over a year ago  ,  Search feature helps.

[gtsmike]

lol. i failed. haha.

thanks.

[jRox]

This bypass is really neat but I am looking for something else.  In position 0 with your bypass, the DRLs are off, where I live it's the law to have working full time DRLs, is there anything you could provide jrox or does anyone know of any type of fix that would work so that once I turn my car on, my HIDs are on aswell?

Also, I got an issue with my LED tail lights where the lights on the trunk are not on but the ones on the body are.  And some of you may know this also has an affect on the cruise control.  Golyadkin suggested swithing a red and black wire a little up the harness, I tried it on one side and it never changed anything and on the other side I never saw a red and black wire.

Thanks

Yes, there is a harness that will turn on your lights as soon as you start your car. This is called an anti-flicker kit. It will basically provide full power to your HID's at all times--Thus, your Low Beams will be ON 24/7.

With an anti-flicker kit installed:

Position 0 - Low Beams ON
Position 1 - Parking lights ON, Low Beams ON
Position 2 - Parking lights ON, Low Beams ON

I actually happen to have 1 x anti-flicker at hand. I've only used it once to verify that its function differs from my DRL Bypass. I can sell it to you for $10 + shipping to your door. PM me if you're interested.

[Mephiles029]

Jrox im goin to need another drl bypass kinda bended one of the female part with my hood and cant reshape it back to normal so nothing fits now :/

[Mephiles029]

Also one more thing i had mines for months and this happen a while back that my hids wont turn on when they are on the on position and i had the bypass for months. But the ballast and bulbs r fine? Any ideas what it could be??

[jRox]

Jrox im goin to need another drl bypass kinda bended one of the female part with my hood and cant reshape it back to normal so nothing fits now :/

Can you take a pic of the female plug? It could possible be fixed with a set of pliers or simply a replacement female plug.

Also one more thing i had mines for months and this happen a while back that my hids wont turn on when they are on the on position and i had the bypass for months. But the ballast and bulbs r fine? Any ideas what it could be??

Sounds like you blew the fuse. Check the fuse located on the red power cable. A replacement fuse can either be 20A or 25A.

[RotorGlow10]

Just ordered a bypass harness from your ebay store JROX. I can't wait to not have DRLs on all the time. Now I just need to convince the wife to let me get HIDs for the lancer being that its actually hers and all.

[Mephiles029]

Can you take a pic of the female plug? It could possible be fixed with a set of pliers or simply a replacement female plug.

Hey JRox yea it did work with a pair of pliers

Sounds like you blew the fuse. Check the fuse located on the red power cable. A replacement fuse can either be 20A or 25A.

You mean the fuse box inside the cabin right??......

[furyschild]

You mean the fuse box inside the cabin right??......

Believe he's talking about one on bypass power lead

[Mephiles029]

Believe he's talking about one on bypass power lead

Cant be because it still works i place it again today and its working fine..... Still i hope it doesnt happen again :/

[Mephiles029]

But if its that then Ill have another look at.......

[jRox]

BUMPski!

[erik09gts]

Just bought a harness from your ebay store. Looking forward to no DRL's, but will be adding LED strip lights.

[RotorGlow10]

I just installed the harness tonight and must say that it is extremely easy. It only took about five minutes and it works perfectly! Thanks jRox for this simple but awesome mod.

[jRox]

I just installed the harness tonight and must say that it is extremely easy. It only took about five minutes and it works perfectly! Thanks jRox for this simple but awesome mod.

Thanks for the positive feedback! 

[jRox]

BUMP for Friday!

[m.s.p]

So aside from the DRL Bypass, and HID's from DDM do we need their error code eliminator or no?



on the side note... i want to get 35w 6000k's for both fogs and lows... only cuz i dont want the shades of light to be different if i got 55w for lows and 35 for fogs anyone care to shed some light on that?

[Mephiles029]

So aside from the DRL Bypass, and HID's from DDM do we need their error code eliminator or no?



on the side note... i want to get 35w 6000k's for both fogs and lows... only cuz i dont want the shades of light to be different if i got 55w for lows and 35 for fogs anyone care to shed some light on that?

No we dont need the error code eliminator just jrox harness

And u gunna see the difference of shade of light between ur lows and fogs. Also for the fogs u gunna have to plug it in backwards to the ballast they seem to have the wires on the wrong side.

[Mephiles029]

JRox the same thing happen again with my bypass they are on the on switch and they just turn off. Im gunna take a look at the fuse box on the red power cable for the harness. I dont wanna go back to regs... 

[m.s.p]

No we dont need the error code eliminator just jrox harness

And u gunna see the difference of shade of light between ur lows and fogs. Also for the fogs u gunna have to plug it in backwards to the ballast they seem to have the wires on the wrong side.

are you saying im going to see the difference even if its 35w for both?

[EvoExia]

I'm a bit new to HIDs, but I've ordered the DRL Bypass from you JRox and I was wondering do I need anything else other than the Bypass and the HID kit (OmegaXenon(dot)com)?

Do I need a Anti-Flickering Capacitator? (xenonsupply(dot)com)

And will I have to change the fuse in the fuse box to an 20 mA or 30 mA fuse?

[gtsmike]

no, dont need anything else... youre good to go!

[rgdft]

you just need the drl bypass, and the hid kit. im running jrox drl bypass and 35w 8000k hids from ddmtuning. works perfect

[EvoExia]

Sweet! Thanks for the help!

Another thing that I wanted to know, do I need to do something with the housing? Or getting it retro fitted?

[Mephiles029]

Sweet! Thanks for the help!

Another thing that I wanted to know, do I need to do something with the housing? Or getting it retro fitted?

Dont got to do nothing man just plug and play

[jRox]

Sorry for not responding to some concerns. Just got back from vacation in Orlando. Looks like everyone's question has been answered by others. Thanks to all! 

In conclusion:  To safely run HID's on 08+ Lancers, you simply need an Aftermarket 9006 HID Plug & Play kit + my DRL Bypass. Nothing else is needed! 

Any other questions, feel free to PM me or post here! 

[EvoExia]

Alright sounds like I'm set then.

Some people told me that i needed projector headlights in order to run them legally in Texas and I'm not sure if i need them or not...I've looked some up and the only one they had for sell was the one by SPEC-D Tuning going for $899.99

[furyschild]

Alright sounds like I'm set then.

Some people told me that i needed projector headlights in order to run them legally in Texas and I'm not sure if i need them or not...I've looked some up and the only one they had for sell was the one by SPEC-D Tuning going for $899.99

Check local laws first you may well need them , But , If you do a search on here you will find there are some ways to make projectors for around $300 total cost but involves some labor.

[jRox]

BUMP for Wednesday!

[KaMiLEVoLuTioN]

BUMP For Saturday!
JRox, I just bought your bypass on Ebay and I do hope it's going to work swell with my hid kit from ddm. ;-)

[jRox]

BUMP For Saturday!
JRox, I just bought your bypass on Ebay and I do hope it's going to work swell with my hid kit from ddm. ;-)

Plenty of customers also use DDM HID kits. It should work no problem. Your order will be shipped tomorrow. 

[KaMiLEVoLuTioN]

Plenty of customers also use DDM HID kits. It should work no problem. Your order will be shipped tomorrow. 

Quick question.
55w 9006, 6000k hid kit will make it look like stock infiniti/acura/bmw have and what not?
I'm talking about the color (6000k). :-)

[MerKa]

So, I just received my DRL bypass. I noticed that it didn't come with the red cable (power +), only two black cables (ground -). Will it still work like this?

Edit: I just got confused, is all. I got up and running now. 

[jRox]

Quick question.
55w 9006, 6000k hid kit will make it look like stock infiniti/acura/bmw have and what not?
I'm talking about the color (6000k). :-)

I personally think 6000k is the closest kelvin rating to the stock HID's from luxury cars.

So, I just received my DRL bypass. I noticed that it didn't come with the red cable (power +), only two black cables (ground -). Will it still work like this?

Edit: I just got confused, is all. I got up and running now. 

Haha, no problem. Good to hear all is well.