Topic: HOW TO: Auto Lock/Unlock Door by Ignition Switch

[stanley2]

HOW TO: Auto Lock/Unlock Door

Hello all, I am here offering you the solution to your need to have your lock automatically locked and unlocked!!!

Today I went to the dealer asking for 2 things, disable DRL and auto lock/unlock the doors, I only got one!!

My wallet is hurting as they charged $1,300.00mxp(some $100usd) to do it, and after looking in Ebay I feel raped:)

O well here is what they did!!

Parts needed:

DEI 452T Door Lock Pulse/Double Pulse Generator
Tape
Knowledge of what wires to connect it to!!

O men I feel so raped!!!

How it is done!!

The 452T has the following wires:

Red       (+) 12V constant power input
Black     (-) chassis ground
Orange  (-) activation input
Violet    (+) activation input
Red/White (+) pulse length control (12V)
Green     (-) 200mA lock output
Blue        (-) 200mA unlock output
Green/White (+) 200mA lock output
Blue/White (+) 200mA unlock output

The ones we need and are connected to :

Red       (+) 12V constant power input connected to thick red wire(see pic)
Black     (-) chassis ground connected to ground
Violet    (+) activation input connected to yellow(see pic)
Green     (-) 200mA lock output connected to yellow/red stripe silver spots(see pic)
Blue        (-) 200mA unlock output connected to grey silver spots(see pic)

In the following 2 pics you can see where the RED and VIOLET wires are connected, RED to the thick RED wire and the VIOLET to the not that thick YELLOW wire

The pics are looking inside the door for the fuses.





In the following 2 pics you can see where the GREEN  and BLUE wires are connected, in the  brown connector the Yellow/Red is the first from the top on the right and the grey is the second on the same side.

This pics are looking to the hood release (just a little up from the handle)





In the following pic you can see a little part of the top of the hood release handle.


It is so easy oooohhhhhh! it hurts!!

Hope this helps more than one!!

Here it is http://www.amazon.com/Install-Essentials-452T-Pluse-Generator/dp/B0009SUEW2

[9gL]

Thank you stanley. + rep

[bluegts09]

Wow thanks for this! I'm going to be doing this in the near future 

[alxlo]

dude I need some help, i cant find the pulse generator im in mexico too 


ty

[kirtangl]

Auto lock? wait... As in the doors lock when you drive off? Unlock when you turn the car off... or lock when you leave the car unlocked for a minute or so... I have been looking for the latter for a while now, was just going to get an alarm to do it   

[stanley2]

Auto lock? wait... As in the doors lock when you drive off? Unlock when you turn the car off... or lock when you leave the car unlocked for a minute or so... I have been looking for the latter for a while now, was just going to get an alarm to do it   

This will lock and unlock as you turn the ignition on and off. As you are driving off.

dude I need some help, i cant find the pulse generator im in mexico too 
ty

You can try contacting DEI Mexico direct:

http://www.directed.com.mx/

Or on Ebay!

[p00shy]

if someone can do this and make a clearer write up, that would be greatly appreciated!

[stanley2]

Hi if you need any help please let me know, I'll try my best to help you install it.

[siutzab]

Ok need help just got mys and where oh where do I stick these wires

[stanley2]

Hi, first step is to remove the following molding from the car:


Next is this molding, under it you will find the brown plug where you can see where the GREEN  and BLUE wires are to be connected, in the  brown connector the Yellow/Red is the first from the top on the right and the Grey is the second on the same side


If you look inside the fuse door you will find the thick red wire (under the white one same plug) and to the left the second plug from the top the yellow wire.